Re: ECU/Data Logger trouble |
Just following up on some older forum posts. This issue was resolved some time ago with an update to the flashing protocol. It should not be a problem now. |
|
Re: ECU/Data Logger trouble |
Problem solved and bike is running. I used ECU Editor and did a full erase. Hope this info helps others.
Thanks for updating
I have had similar experiences with my B-King when struggling to get (new verison of) WRT to connect.
ECU-editor works every time... hmmmm...
Edit:
I have had no trouble when using WRT directly to the ECU with bench-flash harness. |
|
Re: ECU/Data Logger trouble |
Problem solved and bike is running. I used ECU Editor and did a full erase. Hope this info helps others. |
|
ECU/Data Logger trouble |
I've been using the Woolich Data Logger on my 08 B-King with success until recently. Something went wrong when attempting to autotune (I did something wrong). Instead of erasing the ECU and then rewriting the autotuned bin it wants to read the ECU. Near the end of this process it stops at 99.63% and says "complete". I then get a window that say this bin file does not exist it the Woolich mapshare. It seems like part of the original ECU read/reference has been lost or corrupted. Aside from these symptoms, the fuel pump will not run. The tach face also says ""CHEC". I hope this isn't a serious problem. Any suggestions are appreciated. |
|
|
View Topic on the Woolich Racing Forums |