Re: WRL with Zeitronix Zt-3 |
Thanks Justin, I'll do that. |
|
Re: WRL with Zeitronix Zt-3 |
The easiest way is to wire the power and ground for the ZT-3 direct to the battery with the relay triggered by a circuit that is only on when the ignition is on, then just route wire 2 from the ZT-3 directly into ECU pin 34 on the GSX-R 1000 |
|
WRL with Zeitronix Zt-3 |
Hello,
I'm currently trying to hookup the Log box with Zt-3 wideband O2 to my GSXR 1000 K8 racer.
I'm not sure how to connect the O2 sensor.
This is from the Zt-3 manual;
PIN # WIRE COLOR FUNCTION
1 RED Switched Power (e.g. 12 Volt Ignition)
2 WHITE Linear Wideband Analog Output
3 BLACK Ground
4 PURPLE Programmable Simulated Narrowband O2 Output
I guess I have to connect this to the 4 wire standard O2 connections of the bike's wire harness?
https://lh5.googleusercontent.com/-iOu8WvyTt9o/URYQ9drhW2I/AAAAAAAADuk/8kxLyT92onA/s800/GSXR-K8-O2.jpg
Cheers,
Stephen. |
|
|
View Topic on the Woolich Racing Forums |